QC12Y-12*2500 12m hydraulic steel shearing machine

12m hydraulic steel shearing machine

Quick Details

  • Condition: New
  • Model Number: QC12Y-12*2500
  • Voltage: 380v
  • Dimension(L*W*H): 3750mm x 1750mm x 1800mm
  • Weight: 800kg
  • Certification: ISO:9001;2001
  • Sheet thickness: 12mm
  • Width: 2500mm
  • Strokes: 12 mm/min
  • Backgauge range: 600 mm
  • Shearing angle: 2 degree
  • Throat height: 100 mm
  • Main motor: 15 kw
  • Color: discussion
  • Name: 12m hydraulic shearing machine
  • After-sales Service Provided: Engineers available to service machinery overseas
  • Rated Power: 15 kw
  • Warranty: 18 months warranty

Simple introduction

  • * It is adopted hydraulic driving, the frame steelwelded structure which has sufficient strength and rigidity.
  • * The machine is equiped with a power back gauge on whicn, a manual fine-adjusting, mechanism for blade clearance, ashadw light device enribing cutting operatikon, a connter, a sensitive and reliable safety barrier.
  • * It can also be equipped with a support conveyor.
  • * Whole steel welded frame with full strength and rigidity.
  • * Hydraulic upper transport.
  • * Hydraulic press device with reliable safety bar.
  • * Rapid cutting stroke adjustment is adopted, cutting frame can be adjusted ensuring priduction efficiency increase when cutting short sheet.
  • * Back-gauge station adopts motor-driven measure with fine manual adjustment.
  • * Cutting counter device.
  • * Light line device so it is easy to draw line for cutting


  • * The second generation of hydraulic shear.
  • * Welded Steel plate structure, heating to eliminate stress, with high strength and good rigidity.
  • * Advanced integrated hydraulic system with an excellent reliability.
  • * The rolling guide with 3-point support and improves the shearing quality.
  • * Rapidly, accurately and conveniently adjusting the blade clearance with the hand wheel.
  • * The rectangular block blades featuring long lifetime with 4cutting edges in several sections.
  • * The adjustable rake angle can minimize plate deformation.
  • * As the cutting beam has been designed in inner- inclined structure, it is easy for plates to fall down and the accuracy of products can be also guaranteed.
  • * Counter for the motorized back gauge and front control post.
  • * Rear plate-support of the machine (optional).


  • - Adopt integrated hydraulic control system, more reliable and easy for maintenance. The hydraulic system consists of motor, oil pump and valve groups and it is installed at the top of the oil box.
  • - Every complete working cycle can be achieved through the control of hydraulic valve.The remote adjustment valve can adjust the working pressure at the right side of the wall board.
  • - All seals in cylinder is imported,the most famous brand,good quality and high performance
  • -Overload overflow protection is outfitted to hydraulic system,which can assure no leakage,and the oil level can be read or seen directly
  • - The cutting times of this machining tool is displayed on a Estun E10 NC and accurately show the cut after the block size and number display.
  • - The parallelism of the sheet to be cut off and the precision of the shear size can be ensured. The cut stroke and cut times also can be controlled.
  • - Light alignment device eases drawing line for cutting, Standard front support sheet frame, A set of standard blades
  • - System uses a bladder-type hydraulic accumulator as an auxiliary energy,absorb the pressure shock,the machine is running smooth,low noise.

Main components:

  • --Integrated hydraulic system-OMEGA-USA
  • --Axial plunger pump-SHANGHAI-China famous
  • -- Main motor-SIEMENS-Germany
  • --Japan VQUALA seals-JAPAN
  • -- Main electric parts-SIEMENS-Germany


  • --Front extensive arm, 5 pieces
  • --Anchor bolt, 4 pieces
  • --Nut, some pieces
  • --Washer, some pieces
  • --Oil gun, 1 piece
  • --Foot pedal