Swing beam Shearing machine is one of the forging machinery; the main role is the metal processing industry. The machine is widely used in aviation, light industry, metallurgy, chemical, construction, shipbuilding, automobile, electric power, electrical appliances, decoration and other industries to provide the required special machinery and complete sets of equipment.
Hydraulic shearing machine is used to cut different metal materials, such as iron, mild steel, stainless steel, aluminum alley, galvanized plate…… Different material with different tensile strength and should choose different kinds of capacity and model machine.
It is very widely used in aviation, light industry, metallurgy, chemical engineering, construction trades, ships, auto, electric power and engineering, decoration, doors & windows making and so on.
Depends on different material, thickness and length, the shearing machine can be made to different size, capacity and design.
A moving blade then comes down across a fixed blade to shear the material. For larger shears the moving blade may be set on an angle or “rocked” in order to shear the material progressively from one side to the other; this angle is referred to as the shear angle. Setting the blade on an angle decreases the amount of force required, but increases the stroke.
The main required information is the material, cutting thickness and cutting length.
This series shear is mainly used to cut metal plates with the thickness of 0.2-30mm and different shearing length. The maximum cutting thickness is only applicable to carbon structural steel plates with the tensile strength of 450 MPa; if it is used to cut metal plates with relatively high tensile strength such as manganese steel, stainless steel, etc., the maximum shearing thickness shall be less. Thus, when using the shear, the thickness of plates shall be strictly controlled by the operators themselves in accordance with the value of tensile strength of plates. As the cutting angle of this series is fixed, it can not be adjusted according to big thickness difference, usually it is widely used with the thickness of 0.2-16mm. Above 16mm thickness you can choose Q11Y series.
Then,according to the thickness of different material, you can choose the suitable length for yourself. With all of these you can go to the technical parameters table to find the right model and details.
If you need further help from us,please contact us through our contact information.
